SIEMENS SIMATICET 200SP HA, EX-DQ 2x23.1VDC/20mA Bangladesh. Mlfb- 6DL1132-6EB00-0HX1 price

The Siemens 6DL1132-6EB00-0HX1 is a SIMATIC ET 200SP HA digital Ex-i output module designated Ex-DQ 2x23.1VDC/20mA. Siemens identifies it as suitable for Base Unit type X1 and equipped with channel diagnostics. It is intended for intrinsically safe digital output applications in hazardous-area process automation.

The Siemens technical manual specifies dimensions of 20 mm wide, 73 mm high and 58 mm deep, with an approximate weight of 55 g. The module is designed to provide an intrinsically safe interface between the ET 200SP HA electronics and appropriate field devices. Its output characteristic and wire-break diagnostic behavior are documented in the Siemens equipment manual.

2. Technical Specification

Specification	Details
Manufacturer	Siemens
Product Code	6DL1132-6EB00-0HX1
Product Family	SIMATIC ET 200SP HA Ex I/O modules
Product Type	Digital Ex-i output module
Designation	Ex-DQ 2x23.1VDC/20mA
Number of Outputs	2
Base Unit	Type X1
Width	20 mm
Height	73 mm
Depth	58 mm
Weight	Approx. 55 g
Output Type	Intrinsically safe digital output
Wire-Break Check	Supported when parameterized

3. Key Features

• Two Ex-i digital output channels.
• Ex-DQ 2x23.1VDC/20mA specification.
• Suitable for X1 Base Unit.
• Channel diagnostics.
• Wire-break checking can be parameterized.
• 20 mm width.
• ET 200SP HA process automation architecture.
• Designed for hazardous-area output interfaces.

4. Typical Application

• Hazardous-area process control.
• Ex-zone instrumentation.
• Chemical processing.0BA1 provides two 16-bit analog voltage inputs in the ET 200SP format. Its A0/A1 Base Unit compatibility and module diagnostics support integration into distributed automation systems where voltage measurement two-wire and four-wire transmitter arrangements. Its 16-bit resolution, diagnostics, encoder supply and compact ET 200SP form factor make it appropriate for process and factory automation systems requiring multiple current measurement
• Oil and gas installations.
• Process plant distributed I/O.
• Intrinsically safe actuator interfaces.

5. Product Highlights

The 6DL1132-6EB00-0HX1 provides a dedicated intrinsically safe digital-output interface for ET 200SP HA systems. Its two-channel architecture, X1 Base Unit compatibility and documented diagnostic functionality make it appropriate for process automation installations where hazardous-area output requirements must be addressed as part of the overall system design.

6. Important Ordering & Installation Information

Order the exact Siemens article number 6DL1132-6EB00-0HX1 and use the specified X1 Base Unit. Hazardous-area installation requires compliance with the applicable Siemens equipment documentation and intrinsic-safety control requirements. Wire-break checking and other diagnostic parameters should be configured according to the intended application. Siemens Industry Cache

Always follow the manufacturer's official installation, wiring, commissioning and safety instructions.

7. Why Choose Siemens SIMATIC ET 200SP HA Ex-DQ 2x23.1 VDC/20mA?

The 6DL1132-6EB00-0HX1 is purpose-built for ET 200SP HA intrinsically safe digital-output applications. It provides two dedicated Ex-i outputs, channel diagnostics and a defined X1 Base Unit interface, making it suitable for appropriately engineered hazardous-area process automation systems.

8. Product Summary

Siemens 6DL1132-6EB00-0HX1 is a SIMATIC ET 200SP HA digital Ex-i output module designated Ex-DQ 2x23.1VDC/20mA. It provides two intrinsically safe output channels and is intended for use with Base Unit type X1. Siemens documents a 20 × 73 × 58 mm form factor and approximately 55 g weight. Channel diagnostics and wire-break checking are documented functions. The module is intended for hazardous-area process automation, instrumentation and distributed I/O applications requiring intrinsically safe digital outputs.

Product Code: 6DL1132-6EB00-0HX1
Manufacturer: Siemens
Product Family: SIMATIC ET 200SP HA Ex I/O modules
Product Type: Digital Ex-i output module