SIEMENS SIMATIC ET 200SP HA, EX-DQ 2x17.4VDC/27mA Bangladesh. Mlfb- 6DL1132-6CB00-0HX1 price

The Siemens 6DL1132-6CB00-0HX1 is a SIMATIC ET 200SP HA digital Ex-i output module, designated Ex-DQ 2x17.4 VDC/27mA. Siemens specifies it for use with an appropriate Base Unit type X1 and provides channel diagnostics. The module is designed for intrinsically safe output applications associated with hazardous-area instrumentation and process automation.

Siemens documentation specifies a 20 mm width, 73 mm height and 58 mm depth, with an approximate weight of 55 g. The technical documentation also identifies hazardous-area parameters including maximum open-circuit voltage of 19.4 V and short-circuit current of 133 mA per channel, with parallel-operation values separately specified.

2. Technical Specification

Specification	Details
Manufacturer	Siemens
Product Code	6DL1132-6CB00-0HX1
Product Family	SIMATIC ET 200SP HA Ex I/O modules
Product Type	Digital Ex-i output module
Designation	Ex-DQ 2x17.4 VDC/27mA
Number of Outputs	2
Base Unit	Type X1
Width	20 mm
Height	73 mm
Depth	58 mm
Weight	Approx. 55 g
Maximum Open-Circuit Voltage UO	19.4 V
Short-Circuit Current Io	133 mA per channel
Maximum Output Power Po	645 mW per channel
Operating Temperature	-40 °C to 70 °C horizontal; -40 °C to 60 °C vertical

3. Key Features

• Two Ex-i digital outputs.
• Ex-DQ 2x17.4 VDC/27mA design.
• Channel diagnostics.
• Designed for ET 200SP HA.
• Requires suitable X1 Base Unit.
• 20 mm module width.
• Intrinsic-safety parameters documented by Siemens.
• Suitable for hazardous-area process applications.

4. Typical Application

• Process automation.
• Hazardous-area instrumentation.
• Chemical and petrochemical facilities.
• Ex-zone actuator interfaces.
• Distributed I/O in process plants.
• Intrinsically safe digital output circuits.

5. Product Highlights

The 6DL1132-6CB00-0HX1 is specifically designed for Ex-i output applications rather than general-purpose digital switching. Its documented intrinsic-safety parameters, X1 Base Unit compatibility and ET 200SP HA architecture make it appropriate for engineered hazardous-area process-control systems.

6. Important Ordering & Installation Information

The exact article number is 6DL1132-6CB00-0HX1. Siemens specifies use with an Ex-Base Unit type X1, and the intrinsic-safety control drawing provides additional installation constraints and hazardous-area parameters. Verify the complete hazardous-area design, entity parameters and applicable installation documentation before commissioning. Siemens Industry Cache

Always follow the manufacturer's official installation, wiring, commissioning and safety instructions.

7. Why Choose Siemens SIMATIC ET 200SP HA Ex-DQ 2x17.4 VDC/27mA?

This module is intended specifically for intrinsically safe digital output applications within the ET 200SP HA platform. Its documented hazardous-area parameters and dedicated X1 Base Unit requirement make it suitable for process plants where standard digital outputs cannot simply be substituted for Ex-i interfaces.

8. Product Summary

Siemens 6DL1132-6CB00-0HX1 is a SIMATIC ET 200SP HA digital Ex-i output module designated Ex-DQ 2x17.4 VDC/27mA. It provides two intrinsically safe digital output channels and is designed for use with an X1 Base Unit. Siemens documents dimensions of 20 × 73 × 58 mm and an approximate weight of 55 g, together with defined intrinsic-safety output parameters. The module is intended for hazardous-area process automation, instrumentation and distributed I/O applications where intrinsically safe output circuits are required.

Product Code: 6DL1132-6CB00-0HX1
Manufacturer: Siemens
Product Family: SIMATIC ET 200SP HA Ex I/O modules
Product Type: Digital Ex-i output module